Product Detail

Generals. The FA 12000 gives up to 12 kW output power in continous service: all parts used in this amplifier are oversized to guarantee the full power 24/24 h even in hard environmental conditions.

Broadband. The frequency of this amplifier can be easily field tuned from 87.5 MHz to 108 MHz without any parts modification.

Long life tube. The amplifier uses strong and reliable triodes or grounded grid tetrodes, widely used in the broadcast field, that assure long life and low maitenance costs.

High efficiency cavities. A revolutionary cavity design without any sliding contact minimizes the losses, increases the amplifiers efficiency and cavities ruggedness as well.

Single tube. No coupled tubes for the best system reliability.

Adjustable output power. The tube's polarization allows the adjustment of output power simply varying the input one.

Electronic protections assure an affordable and stable operation protecting units against major fault conditions.

Remote control logic enable the equipment management for local or remote mode.

Full Metering. All the main parameters of the amplifiers are front panel displayed by a complete measuremet system.

Operator's safety. is protected by active and passive devices according to international standards.

Soft-start circuit control: the gradual insertion of power supply eliminate transient problems during start-up.

On-air removable air filter with high filtering capacity allows to work in dusty places.

Forced air cooling. An oversized cooling system guarantees regular functioning and long life for the cavity/tube set even in hard environmental conditions.

Meets or exceeds all international standards for safety and electrical requirements.


	FA 12000 Tube Amplifiers
	Generals. The FA 12000 gives up to 12 kW output power in continous service: all parts used in this amplifier are oversized to guarantee the full power 24/24 h even in hard environmental conditions. Broadband. The frequency of this amplifier can be easily field tuned from 87.5 MHz to 108 MHz without any parts modification. Long life tube. The amplifier uses strong and reliable triodes or grounded grid tetrodes, widely used in the broadcast field, that assure long life and low maitenance costs. High efficiency cavities. A revolutionary cavity design without any sliding contact minimizes the losses, increases the amplifiers efficiency and cavities ruggedness as well. Single tube. No coupled tubes for the best system reliability. Adjustable output power. The tube's polarization allows the adjustment of output power simply varying the input one. Electronic protections assure an affordable and stable operation protecting units against major fault conditions. Remote control logic enable the equipment management for local or remote mode. Full Metering. All the main parameters of the amplifiers are front panel displayed by a complete measuremet system. Operator's safety. is protected by active and passive devices according to international standards. Soft-start circuit control: the gradual insertion of power supply eliminate transient problems during start-up. On-air removable air filter with high filtering capacity allows to work in dusty places. Forced air cooling. An oversized cooling system guarantees regular functioning and long life for the cavity/tube set even in hard environmental conditions. Meets or exceeds all international standards for safety and electrical requirements.




	FA 12000 Tube Amplifiers

	RF Data: Operating frequency range 87.5 ÷ 108 MHz Output power 0÷12000 W adjustable output power tolerance ± 1 dB Input power 0 to 500 W Harmonics and spurious emission ( ref. to carrier) -72 dB Input and output impedance 50 W Power gain at maximum power 13 dB Input connector 7/16'' type (other types by request) Output connector EIA 1+5/8'' (other types by request) Power supply: Operating mains voltage 380 ± 5% Vac three-phases or 220 ± 5% Vac Max power consumption About 20 kVA Operating conditions: Cooling forced air (centrifugal fan) Service continuous 24/24h Temperature range -5 to +45°C Humidity 95% max Max. Installation altitude 3000 m a.s.l Weight and dimension: Weight 390 kg Dimensions (W x H x D) 570 x 1720 x 850 mm

	ITEL S.r.l. TELECOMUNICATIONS AND BROADCASTING SERVICES Via Friuli, 6 - 33074 Fontanafredda (PN) - ITALY Tel. +39 0434 997667 - Fax. +39 0434 997687